Walkie Talkie

While the IC-V85 provides a full 7 watts of output power, its 110mm* body height is compact enough to allow for easy carrying.
* 4¹¹⁄₃₂ in (projections are not included)

7W of high output power

Let the power of 7 watts extend your communications range. With its large capacity Lithium-Ion battery pack, BP-227, the IC-V85/E provides a practical 7 hours* of operating time. Reduced power (4W/0.5W) settings are also available for even longer operating time.
* Typical operation with Tx: Rx: standby=1:1:8.

External DC power jack

An external DC power jack allows for operation when used with the external DC power supply (11.0V DC).
Your IC-V85/E receives and transmits as it charges.

Water resistant construction

The water resistant construction, equivalent to IPX4 rating, provides reliable operation in wet conditions for practical outdoor usage.

107 memory channels and 10 memory banks

Up to 107 memory channels can be stored. Use the 5-character display capabilities to assign your own individual channel names, then store those channels in any of the 10 memory banks. The DMS (Dynamic Memory Scan) system allows you to scan selected memory banks by simply adding and deleting bank links.

Built-in CTCSS/DTCS

Built-in CTCSS/DTCS tone codes provide quiet stand-by and allows you to use tone-access repeaters.
The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the tone frequency used in the received signal.

DTMF memory and optional DTMF decoder

16 DTMF memory channels with up to 24 DTMF codes enable you to perform remote control operation.
The optional DTMF decoder unit, UT-108, provides code squelch operation and pager function.

Other features

Specifications

General

Frequency coverage

(unit : MHz):

Version	Tx	Rx (Working range)
USA	144–148	136–174*¹
Europe	144–146	136–174*²

Guaranteed range *¹ 144–148MHz, *² 144–146MHz

Mode

No. of memory Ch.

107 (incl. 6 scan edges and 1 call)

Operating Temp. range

–10°C to +60°C ;

+14°F to +140°F

Frequency stability

±2.5ppm (–10°C to +60°C)

Power supply requirement

BP-226/BP-227 or

11.0V ± 15% (External DC in)

Current drain (at 7.2V DC)

Tx	High (7W)	2.6A
Rx	Max. audio	250mA
	Stand-by	80mA
	Power save	30mA

Antenna impedance

50Ω (BNC)

Dimensions (W×H×D)

(Projections not included)

56 × 110 × 34.4 mm;

2⁷⁄₃₂× 4¹¹⁄₃₂× 1¹¹⁄₃₂ in

Weight (approx.)

310g; 12.5oz (with BP-227 and Ant.)

Transmitter
Output power (at 7.2V)	7.0/4.0/0.5W (High/mid/low)
Spurious emissions	Less than –60dBc
Max. freq. deviation	±5.0kHz
External microphone connector	3-conductor 2.5(d)mm (¹⁄₁₀″) /2.2kΩ

Receiver
Intermediate freq.	46.35MHz/450kHz (1st/2nd)
Sensitivity	Less than 0.2μV (at 12dB SINAD)
Squelch sensitivity	Less than 0.16μV (threshold)
Selectivity	More than 55dB
Spurious and image rejection	More than 60dB
Intermodulation	More than 55dB
Audio output power	More than 300mW with an 8Ω load
Ext. speaker connector	3-conductor 3.5(d) mm (¹⁄₈″) /8Ω