 Model Number |
IC-V82/U82 |
High Power! Digital Capability! Power to Go Anywhere!
Optional digital unit, UT-118
The optional UT-118 provides D-STAR format digital voice and slow data communiation. The UT-118 includes the following digital features.
Callsign calling
In the digital mode, your callsign and the receiving callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory.
Position exchange with external GPS receiver
When connected to an external GPS receiver*, position information can be exchanged with other stations. When the receiving side is connected to a PC**, position monitoring is possible.
* NMEA 0183 output and RS-232C interface are required.
** Position mapping software required (Not supplied by Icom ).
And more digital features
20-character short data message
- Digital code squelch
- EMR communication
- Digital pocket beep
- Stand-by beep
7W powerful output power
A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time.
* 5W for UHF.
200 memory channels and 10 memory banks
Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom’s exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting blank links.
Built-in CTCSS/DTCS
Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow you to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency.
Other features
- NOAA weather channel receive*
*USA version only
- Automatic repeater function*
*IC-82 USA version only
- Reversible control knob and up/down buttons assignment
- Durable construction and simple operation
- 16 DTMF dial memory
- PC cloning capability
Specifications
| General |
|
Frequency Coverage
(unit: MHz)
|
| Version | IC-V82 | IC-U82 |
| USA |
Tx 144-148
Rx 136-174*1
|
Tx 420-450*2
Rx 400-479*2
|
| Europe |
144–146 |
430–440 |
Guaranteed Range *1 144-148MHz, *2 440-450MHz |
| Mode |
F3E, F2D, F7W*
*Optional UT-118 Required |
| Number of memory Ch. |
207 (incl. 6 scan edges and 1 call) |
| Operating Temp. Range |
-10°C to +60°C; +14°F to +140°F |
| Frequency stability |
±2.5 ppm (-10°C to 60°C) |
| Power supply requirement |
7.2V DC
(6.0-10.3V DC aceptable; Icom's battery pack only)
|
|
Current drain
(at 7.2V DC)
|
| | IC-V82 | IC-U82 |
| Tx |
High (7W/5W) |
2.6A |
2.0A |
| Rx |
Max. audio Standby
Power Save |
250mA
80mA
30mA
|
250mA
80mA
30mA
|
|
| Antenna impedance |
50Ω (BNC) |
| Dimensions (W×H×D) (Projections not included) |
54 × 139 × 37.5 mm;
21/8 × 515/32 × 17/16 in
|
| Weight (approx.) |
390g; 13.8oz (w/ant. and BP-222N) |
| Transmitter |
Output power (at 7.2V DC)
IC-V82
IC-U82
|
7.0/4.0/0.5W (High/mid/low)
5.0/2.0/0.5W (High/mid/low)
|
| Spurious emissions |
Less than -60dBc |
| Max. freq. deviation |
±5.0/±2.5kHz (Wide/narrow) |
| External Microphone connector |
3-conductor 2.5(d)mm (1/10") / 2.2kΩ |
| Receiver |
| Receive system |
Double conversion superheterodyne |
| Intermediate freq. |
46.35MHz/450kHz (1st/2nd) |
| Sensitivity (typical) |
0.16µV (typ.; at 12dB SINAD) |
| Squelch sensitivity |
0.11µV (typ.; threshold) |
| Selectivity |
More than 55/50dB (wide/narrow) |
| Intermodulation |
65dB (typ.) |
| Spurious and image rejection |
80dB (typ.; VHF)
70dB (typ.; UHF)
|
| Audio output power |
300mW with an 8Ω load |
| Ext. speaker connector |
3-connector 3.5(d) mm (1/8”) / 8Ω |
| Ext. Data connector |
3-connector 2.5(d) mm (1/10”) |
|
Click to enlarge image
Related Keywords:
Bookmark / Share this page